Detailed and complicated parts are never a problem for the skilled staff at Wisconsin Metal Parts. Our customer got us involved early in this project and we helped develop this Heat Transfer part all the way from prototype through production. When approached to fabricate this heat transfer part, we knew we could build the necessary tooling and fixturing. Made from aluminum, we applied stamping, CNC machining, manual milling, and CNC sawing to produce over 100 configurations of slots, holes, and lengths called for on the 2D CAD drawing. The tubes were of variable lengths up to 48”. Manufacturing of these tubes required a contaminant-free environment and we maintained manufacturing tolerances to ±.005” throughout the process. The finished tubes were also specially packaged to prevent contamination. Wisconsin Metal Parts is capable of handling difficult or intricate parts that require multiple forms of production.
To learn more about this project, including tolerances and inspection processes, please contact us today or see the table below.
Stamping Press for Slots
Secondary Air Presses
CNC Machining Slots
CNC Machining Holes
CNC Production Sawing Variable Lengths
Special Packaging Process
In-Process Inspection
CNC Fixtures to handle variable lengths built in-house
Inspection fixtures built in-house
Height Gages
Inspection gages built in-house
First Article, PPAP level 3
Material certification (Certs)
Certificate of Conformance (COC)
Weekly shipments
Customer internal specifications. Returnable packaging.